Skip to content

Is Your Convenience Store Missing Out on Savings Opportunities?

Small format retail facilities face different operational challenges than supermarkets or other large format retailers. Applying a control system can help turn the challenges or problems these facility managers face into opportunities to reduce costs and enhance operations.

Is Your Convenience Store Missing Out on Savings Opportunities?

Most convenience stores do not have system controls. In a typical convenience store, the HVAC systems, refrigerated cases and lighting are managed separately and are not connected. The refrigeration system is often stand-alone and while thermostats are used, they may not be programmed to the correct settings. Manual processes may be in place to manage lighting controls.

For convenience store facility managers, your key problems likely include:

  • Limited visibility into store operations: If you are responsible for multiple stores, you may not have the oversight to know what is happening in all of your locations at any given time.
  • Difficulty of enforcing store policies: You may have established business policies around lighting and thermostat settings, but how do you know that they are being enforced by the store manager and followed by personnel in a single store?
  • Poor maintenance: Many facilities use a “run to fail” maintenance strategy, meaning that the equipment generally will fail without warning, leading to emergency repairs or replacements on short notice.
  • Energy leakage: If a mechanical problem or personnel issue causes a store to stray from the policies put in place – for example, settings on a thermostat are changed or canopy lights are left on throughout the day – this can lead to energy usage that is higher than necessary.

If an average 5,000 square foot convenience store spends $62,000 annually on operational costs, they may spend 44.5 percent of the budget on energy and 17.5 percent on maintenance. If this was your store, how much could you save by addressing the problems above? A control system can provide a convenience store typically between five and 20 percent savings, depending on the current facility management in place.

A control system consists of three layers and understanding the system architecture is beneficial to realizing the ways it can improve efficiency, reduce costs and enhance operations. The three layers include:

  • Control: The control layer includes the electronic elements within your case that have control algorithms to affect the HVAC systems, refrigeration systems and lighting. The controls include the inputs and outputs, the sensors and transducers, and the equipment interface.
  • Supervisory: The supervisory layer provides visibility. This layer offers user management, user interface, access to monitor the system remotely, alarm management and data logging.
  • Enterprise: The enterprise layer is the connection from the sites to the cloud, where the data collected from the systems in your stores can be stored, compared and analyzed.

Many people think having controls and stopping at the first layer is enough, but that’s not the case. It’s important to apply the entire system to manage, monitor and optimize your small format facility.

Interested in learning more about control systems for convenience stores? Look for future blog posts on this topic here over the next several weeks. And, if you have specific questions, please email me at John.Wallace@Emerson.com.

John Wallace
Director of Innovation, Retail Solutions
Emerson Climate Technologies

2 Comments Post a comment
  1. The “run to fail” mentality mentioned in this nice article is not limited to small c-stores. We at coilpod.com were told by a major pharmaceutical chain that they do not regularly clean the condenser coils in their plug-in cooling appliances. This is a target market for our COILPOD dust containment bag.

    May 23, 2014
  2. John Wallace #

    Thanks for the comment Richard. I agree with your point that dirty condenser coils are a problem not only for C Stores but lot’s of other areas as well. Anything that can improve this problem would be very benefical.
    Has anyone else had a similar experience with dirty condenser coils? I’m curious what others feel is the biggest issue related to small format maintenance.

    May 27, 2014

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 74 other followers

%d bloggers like this: