Skip to content

Time Is Running out for Foodservice OEMs to Meet DOE Compliance

The Department of Energy’s (DOE) final rule on stand-alone commercial refrigeration equipment goes into effect on March 27, 20171, requiring on average a 30–50 percent2 reduction in energy consumption. Foodservice OEMs who are still offering non-compliant equipment after March 2017 face the potential for DOE civil penalties. But the 2017 DOE deadline isn’t the only regulatory challenge facing OEMs. Less than two years later, the Environmental Protection Agency (EPA) SNAP delisting ruling3 will phase out the common refrigerants R-404A and HFC-134a in the same class of equipment. This perfect regulatory storm is presenting foodservice OEMs with unprecedented system design challenges.

DOE_Compliance

The timing of these two regulations is forcing OEMs to make a difficult choice: either deal with each regulation separately or combine efforts to comply into a single design cycle. Here’s what foodservice OEMs need to know about the convergence of DOE and EPA regulations:

  • OEMs must act now to comply with the DOE energy reduction mandate on reach-in, stand-alone commercial refrigeration equipment — on average 30–50 percent
  • EPA is phasing out R-404A and HFC-134a in reach-in equipment on January 1, 2019, in favor of low-global warming potential refrigerants
  • All equipment not listed in the DOE compliance certification management system (CCMS) may be subject to civil penalties
  • Design consultants and end users will soon be seeking DOE- and EPA-compliant units; non-compliant OEMs may assume significant business risks
  • OEMs must choose: one design cycle or two
  • Completing the engineering design cycle will take time

Emerson Climate Technologies Has the Expert Resources to Ensure Compliance

If you’re an OEM who has hasn’t begun to think about DOE compliance, we are here to help guide you through this rapid transition. No two systems are alike, and we understand that achieving compliance is more than just changing the engine under the hood — it’s about looking at the efficiency of the whole system, from doors, lighting and insulation to controls and compressors.

Our Design Services Network offers the certifications and accreditations to ensure your equipment is compliant, including:

  • UL and EPA approved as a third party test lab
  • Fully accredited with ISO 17025
  • Approved by the California Energy Commission

For years we’ve been developing the next generation of DOE- and EPA-rated and certified components across our complete product portfolio. We have specific products that meet these requirements, including: Copeland Scroll™ line expansions to include smaller displacements, horsepower and capacities; high-efficiency hermetic and semi-hermetic reciprocating compressors in fractional horsepower that deliver double-digit energy efficiency gains; and condensing units designed to maintain existing stand-alone footprints. We have the breadth of products, knowledge and resources to help you address each regulation separately or combine compliance into a single design cycle.

It’s not too late to comply, but the clock is ticking. We’re ready to help you make the right decision for your business, so let us know how we can help you achieve compliance and answer your questions.


References:

  1. https://www.regulations.gov/#!documentDetail;D=EERE-2010-BT-STD-0003-0104
  2. http://www.emersonclimate.com/en-US/About_Us/industry_stewardship/E360/Documents/Atlanta-Presentations/how-to-meet-wicher-jayanth-021516.pdf
  3. https://www.epa.gov/sites/production/files/2015-08/documents/snap_regulatory_factsheet_july20_2015.pdf
No comments yet

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: